Regardless of its strange appearance, 192.168.l.254 is used as a default IP address of many routers, and there is a good possibility of you encountering it if you ever decide to change the Wi-Fi name or password of your network.

It is understandable for people not to imagine an IP address like 192.168.l.254 when looking to access the web interface of the router, but this IP address is, in fact, the default IP address for a handful of router brands, which include:

While 192.168.l.254 looks atypical IP address to many individuals, there is nothing strange about it. 192.168.I.254 is a private IP address where you need to replace the letter ‘l’ with ‘1’ like to have the IP address working for you. Many IP addresses are intended for public use, some are not, and this particular IP address falls in the three IPv4 address ranges used for private networks. 

How to log into

You need to put the IP address into the URL bar of your web browser, and as you do so, the browser will greet you with a login screen.

You must enter the correct IP address because if you enter 192.168.l.254 instead of, it will not get you the desired results. You would likely see an error message, something like this “ERR_NAME_NOT_RESOLVED” error.

You should also aware of the router login password. In most cases, you can find the password on the back or bottom of the router.

How to access My Router’s Admin Panel?

There is no way to work for all kinds of things when accessing the router’s admin panel. You will have to improvise a bit to access the admin panel of your router.

  • Launch a web browser on your computer.
  • Enter Http //192.168.l.254 in the address bar and then hit Enter.
  • Now, enter the router’s username and password.

In case you face any unexpected problems, you will have to factory reset the router to restore its default settings.

How to troubleshoot the Http //192.168.l.254 not working issue?

If you have tried accessing but received an error message despite entering the correct username and password, then make sure your router is connected to the internet. If the router is connected to the internet, yet the IP address does not work, then you will have to perform the following steps:

  • Ensure that the router is connected to the internet via an Ethernet cable because it is more secured than Wi-Fi.
  • In case the connections are secure, you will have to reboot the devices connected to the router. For that, unplug the modem and router from AC mains. Wait for a couple of minutes, then re-plug both devices.
  • If a firewall is enabled on your computer, you need to disable it.
  • If you continue to receive an error message while accessing the IP address, you should reset your router.


The bottom line is that address is a private IP address used to access any routers admin panels. If this IP address is not working on your web browser, you need to contact official support providers for quick and reliable assistance.

More Info on our blog section.