How To Reset An Arris Router?

Reset Arries Router

Is your Arris Router behaving abnormally as of late? Are you facing issues while accessing the internet as well? If that is the case, you will have to get inside the router’s settings to check if everything is OK. To access the settings, make sure you have the correct Arris router login details. You can find the login details on the router itself, but if you have changed the credentials in the past, you will have to add those in the correct fields. 

If you are aware of the router’s login details yet unable to log in successfully, you won’t be able to tweak the settings. Now, you have only one option left, i.e., reset your Arris Router because your router’s proper functioning can only be restored if you roll back its settings to factory defaults. Doing so will let you access the router’s web interface along with enjoying fast and seamless internet as well. When it comes to resetting the Arris router, you have two ways to go about the process.

Note – Resetting your router to factory defaults will wipe all your device’s settings. You will have to reconfigure network settings such as your network’s name and password. 

Use the ‘Reset’ button to reset the router.

You can easily reset the router using the ‘Reset’ button. You can quickly locate the ‘Reset’ button on the router, as it is present on the device’s back. In case you are unable to find the ‘Reset’ button, you can search on the web for the router model you are using. You won’t find any issue while resetting the router. 

After you locate the button, press and hold the ‘Reset’ button for at least 15 seconds, the switch is a bit recessed, so you will have to use a pointed object such as a paperclip or pin to press the button.

Please wait until the reset process happens, as it will take a few minutes.

Reset the router using its web interface

You can sign into the web interface using Arris router login credentials to reset the device. 

  1. On your computer, launch a web browser and log in to your Arris router using the correct username and password. 
  2. As you log into the web interface, look for a section that says, ‘Security or Utilities.’ This option can vary depending upon the router model.
  3. As you enter this section, find the option labeled ‘Factory Reset’ from the options list. 
  4. You need to wait for a few minutes or until the router completely resets. 

That concludes the reset process, so if you can successfully carry out the process, that’s great. If not, you should take the help of router experts to fix all the issues befalling Arris router or to know how to reset the router. 

How To Solve “Can’t Login to Spectrum” Error?

Spectrum Router

Spectrum TV users must keep in mind that they always have to sign into their account to stream live TV and watch on-demand content. Logging into Spectrum will also allow them to filter and view the guide, make changes to account, pay the bill, and enjoy a wide range of services offered by the company.

If you are using Spectrum, then you must have downloaded the Spectrum app on your smartphone. This app lets you control the TV and router in the most suitable way.

What causes Spectrum login error?

Many Spectrum users have faced situations where they are unable to find the login option on the app. Some of those people were using Spectrum router while others were using Spectrum TV. Users also noticed that whenever they log onto the webpage, it goes into a redirect loop instead of landing on an actual sign-in page.

If you are experiencing any such issue or a completely different error such as ‘something went wrong’, then there is definitely a Spectrum router login issue. At times, the login issue appears when users forgot their username and password.

How to fix Spectrum WiFi Router login not working issue?

If you come across any of the aforementioned issues, then you can fix them by following these steps:

Fix redirect loop – The redirect loop at login can happen when you move from one place to another. Spectrum provides all account numbers with a unique physical address.

When you transfer your service or move to a new location, you will be assigned a new account number. This means you won’t be able to login successfully as the service still associates your old account number with your login. You can get in touch with experts to fix the problem.

Spectrum is going to associate a new account number with your login or create a new login for you.

Retrieve your username or password – You won’t be able to perform a successful Spectrum login if you can’t remember your username and password. To retrieve either of these, follow these steps:

  1. Go to
  2. Select ‘Forgot Username’ or ‘Forgot Password.
  3. Go to the next page and select ‘Contact Info’.
  4. Enter a phone number or email address associated with your account.
  5. Confirm that you aren’t a robot.
  6. Now, you need to confirm your account by selecting the suitable information related to it.
  7. Verify your identity, which will be done when a verification code is sent to you via a text message, email, or phone call.
  8. Enter the verification code that you received.
  9. Now, you need to sign into your account or reset the password.

How to fix ‘no login screen’ issue?

If you have the correct login details, but you are unable to see the login screen, then it means you are not using Spectrum internet. Spectrum makes use of its internet to authenticate the subscriber’s account automatically.

You don’t have to sign into your account in case the service recognizes that your IP address is the one that you used to pay for your subscription. The issue will arise if you are not on the same network that as your modem or if there is any issue on the Spectrum’s end.

Spectrum login error could also arise due to a buggy app, and if that is the case, you will have to uninstall the current version and uninstall a new version. Then, you should clear the cache, cookies, and active logins from your web browser and try to login again. If you come across a different error, such as a service exception error, then you should get in touch with Spectrum support providers.

How To Log In To An Arris Router?

Arres Router

A significant number of people are using Arris routers and if you too are among those people, then you will be interested in the process Arris router login. This guide will show you the exact procedure as to how you can login to your Arris router or modem using Arris router IP and default password.

If you have Arris login details at your disposal, then you will be in a better position to set up and configure your router, secure your Wi-Fi network and enable and disable guest Wi-Fi networks, etc.

What’s the default login details of the Arris router?

Here is the default username and password for the Arris router:

  • Username: admin
  • Password: password

Now you should login to your Arris router:

Connect to your Arris Network

You need to connect your wired or wireless network with the help of your computer or phone.

Launch a web browser on your computer and go to the router’s IP

You need to enter ‘’ in the address bar. In case, this IP doesn’t work, then you need to try these IP addresses.


Enter the default Arris router’s password.

Here are the details that you need to use to perform Arris router login:

  • Username: admin
  • Password: password

In case, this doesn’t work, then you or someone else have changed the details, so you’ll have to factory reset your router to change the details to defaults.

Can’t login to Arris Router?

In case, you are unable to connect to the Arris router, then you should reset your router.

Here are the steps that you need to follow to reset the Arris router:

  1. On the backside of your router, look for the ‘Reset’ button.
  2. Press the ‘Reset’ button using a sharp object for 12 seconds or until you see all the LEDs on the router glowing at once.
  3. The router will boot, so wait until that happens. Once it boots successfully, it means the router is restored to factory default settings.

How to access the Arris router settings page?

To access the settings page of the Arris router, follow these steps:

  1. Connect your PC to the Arris router using an Ethernet cable. Plug one end of the cable into the Ethernet port of the PC with another end going into the router’s Ethernet port.
  2. Launch a web browser on your PC and enter ‘’ in the address bar. Hit ‘Enter’ and let the page load up.
  3. Locate ‘Login’ button on the webpage. Click on it and enter the default username and password as mentioned above to perform Arris modem login.
  4. As you enter the dashboard of your router, you will have to configure the wireless settings. Tap on the ‘Wireless Setup’ link located on the left side of the page.
  5. Next, you need to click on the ‘Channel and SSID’ link followed by entering your router’s wireless network name. Click on the ‘Security’ link to set a passphrase for your network.
  6. If you wish to set a custom password, then tap on the ‘Utilities’ link on the left side of the page followed by clicking ‘System Settings’ that you can find in the ‘Administration Password’ section.
  7. After that, click ‘Save’ to save the new password.

If you are still not able to perform a successful Arris router login, then you should take the help of Arris router experts.

Why Can’t You Connect To Home WiFi Network Through Xfinity Router?

xfinityreset button image

Xfinity Router is one of the most sought after products of Comcast. The company has launched a highly efficient fleet of routers, which are capable of delivering lightning-fast internet without any connection issues. If you are using an Xfinity router, but able to connect to the home Wi-Fi network, then, there are clearly some problems with the router or the settings that you have performed. You need to follow certain steps to restore internet access at home.

Note – If you are experiencing connection related issues on more than one device, then it is possible that you are facing network connectivity issues. So, you will have to troubleshoot your network.

Issues connecting a single device to home Wi-Fi – Troubleshooting

In order to determine whether the problem that you are facing has something to do with your login credentials, network or device, you can follow the below-mentioned steps.

Login Credentials

You should confirm that you are using the correct name and password of your Wi-Fi network because if the login details are not correct, then you are obviously going to face connectivity issues. Apart from that, you need to confirm that your device connects to the correct network. At times, you will see a new device trying to join an Xfinity Wi-Fi hotspot, so it should connect to the correct network.

Device Problems

Here are the steps that you can follow to connect to a Wi-Fi network:

  1. If you have connected a device to your home network in a successful manner before, but are not able to do the same now, then you need to confirm that:
    1. The device isn’t blocked or paused in xFi.
    2. The password to the network is not changed.
  2. The issue could be with the device you are trying to connect, so you need to restart the device. Restarting the device is most likely to fix the problem. In case, it doesn’t, then keep reading the steps.
  3. You need to troubleshoot the device from xFi.

Network Issues

If you are still not able to connect to your home network or facing slow internet connection problems, then you might be dealing with a network issue. You need to confirm this by trying to connect to other devices. If the attempt goes in vain, i.e., the devices didn’t connect, then you will have to troubleshoot your network.

If you know the steps for troubleshooting your network, then that’s great. You can simply go ahead with the procedure and resolve the network problem. In case, you don’t know anything about troubleshooting the home network, then it is better to leave things to experts because they can assist you regarding this in the most suitable way.

Description – For those using Xfinity Router, the problem of not being able to connect to home Wi-Fi network is indeed quite common. However, there is a simple solution to the problem, which is explained in the post. Go through the entire steps and fix this problem once and for all.

How To Perform Sagemcom Router Login & Access The Web Interface?

sagemcom router login

When you buy a new router, you begin to set it up in order to access the internet. But, do you know that connecting a few cables and wires doesn’t complete the setup process? If not, then you should understand that accessing the internet with the help of a router is only possible when you access the web interface of the router. The router we are going to use for the process is a Sagemcom router.

The web interface of Sagemcom router is basically the control panel where you can change all the settings of the router. However, to make changes to the network, you will have to log in to Sagemcom router.

What do you need to access Sagemcom web interface?

Here is what you need to access the web interface of Sagemcom router.

  1. Sagemcom router.
  2. Network access either through Wi-Fi or LAN cable.
  3. An internet browser.

Once you have these things, you can follow the below-mentioned steps to access the web interface of Sagemcom router.

  1. Keep in mind that you are connected to the Sagemcom router.
  2. You must be connected to the Sagemcom router’s network to be able to access its web interface.
  3. You can connect to the network either with the help of Wi-Fi or Ethernet cable.

Tip – If you are not aware of the Wi-Fi password for the Sagemcom router, then don’t worry, as you can connect the Ethernet cable that doesn’t require a password.

  1. Launch a web browser and enter in the address bar. If this IP address doesn’t work, then you will have to look for the default Sagemcom IP address from the list of IP addresses of Sagemcom routers.

Tip – As you are connected to the Sagemcom router, you can easily find the IP by searching for ‘what is my router IP com’ website. If the Router private IP turns out to be, then you can enter it in the address bar, and hit ‘Enter’.

  1. Type in the username and password for your Sagemcom router. You can look for the default username and password of Sagemcom router by looking at the back or bottom of the router. If you have changed the login credentials, then you should enter the ones that you created. If you are not able to remember the username and/or password, then you will have to reset the router to restore the credentials to factory defaults.

What is the process of configuring Sagemcom router?

As you log into your Sagemcom web interface, you can change any settings that you like, but keep in mind not to touch the setting that could break the network.

Tip – You should write down the current settings before you make any change, as this will help you get the old, working settings back just in case, the new settings disturb the network.

What if the Sagemcom router or network ceases to work post configuration change:

If that happens, then you will have to reset the router by following the 30-30-30 technique. Resetting the router is the only method by which, you can bring the configuration of the router back to its original values and restore the functioning of the router as well.

In case, you experience any other issue pertaining to Sagemcom Router, then you can get in touch with router experts.

Description – If you are using Sagemcom router and want to know how to access its web interface, then you can go through the post and find out all the details.

Motorola Router’s Default Username & Password – How To Reset It?

Motorola Router Login

Motorola Router is among the most popular routers in the United States. If you are using this particular brand of router, you need to find the default credentials to log into the router. We don’t know if you are aware of this or not, but most Motorola routers have a default username and password, i.e., ‘admin’ and ‘motorola’ respectively. As far as the router’s default IP address is concerned, then it is ‘’.

When you want to login to your Motorola router’s web interface to change any settings, you need to enter the aforementioned credentials.

In case, you are not able to login to the web interface of Motorola router or you have forgotten the password for your Motorola router. You can reset the router to factory default settings because that is how you can get into the web interface of the router.

If you don’t know what the model number of your Motorola router is, you need to press ‘Ctrl + F’ if using a Windows PC or ‘cmd + F’ if using a Mac computer. Although the login credentials are the same for most Motorola routers, if you cannot get inside the web interface of your Motorola router, you need to reset it.

What to do if you have forgotten your Motorola router password?

If you have changed your Motorola router’s username and/or password and can’t remember as to what the new username and password was, then you don’t have to worry at all. You can reset the Motorola router to its default factory settings, reset the username and password to ‘admin’ and ‘motorola’, respectively.

Motorola Router LoginTo reset the router to the default password, you need to do a 30-30-30 reset, which you can do by following the below-mentioned steps:

  1. Begin with powering on your Motorola router, followed by resetting the same. For that, you need to press and hold the reset button for 30 seconds.
  2. While keeping the reset button pressed, you will have to disconnect the router from the power supply. As you do so, make sure to press the reset button for another 30 seconds.
  3. As you hold the reset button, you need to turn on the router again by plugging the power cable back into the power supply, followed by holding the reset button for another 30 seconds.
  4. With that, your Motorola router is going to be reset to the default factory settings.

In case the Motorola router doesn’t reset to factory settings, you will have to get in touch with Motorola router support providers.

Note – You need to change the default username and password to enhance the Motorola router’s security once it has been reset to factory settings, as default passwords are known to everybody. You should change the password to something impossible to decode. Use a mix of uppercase and lowercase alphabets, numerals, and special characters to ensure that your network becomes impregnable.

Check out how to Configure a Motorola Router over here.

How To Set Up And Configure Spectrum Router/Modem?

Spectrum Router

Spectrum routers are widely used in the US, and people know these routers as ‘Charter Spectrum Routers’. Spectrum, as we all know, is into multiple niches such as internet, cable, TV streaming services and many more. The internet service comes with a complimentary modem/router, which users get access to without paying any rental fee. Therefore, if you are a Spectrum user, then you will get a modem on rent without paying any extra buck to the company. The only time you will be paying is when buying one of the company’s Wi-Fi plans.

There are several subscription plans that you can choose from, based on the speed, data usage, data limit and more. You will get a complimentary router, but if you want, you can get the router of your own choice as well. In case, you are planning to buy a Spectrum router rather than renting one, then you must know about the technical aspects of the router such as, which router is going to be compatible with your internet connection, the power source it needs and many more. Once you have answers to all these basic yet important questions, you can get the router; otherwise, it is better to rent the router without paying a single penny. Besides a free rental router, the company also offers free antivirus, a feature that you must definitely opt for.

If you are trying to figure out the process of setting up and configuring your Spectrum router, then here is what you are going to do:

Spectrum modem accompanies with the following items –

We are taking a small de-route before getting onto the setup and configuration process of the Spectrum router. It is important for you to know as to what different components Spectrum router has. Here is the list of the same:

  1. A modem.
  2. A power cord.
  3. A two-way splitter.
  4. An Ethernet cable.
  5. Two sets of coaxial cables.
  6. User guide.

Here are the steps for setting up and configuring Spectrum Router:

  1. The process begins with connecting one end of the coaxial cable being connected to the cable outlet with the other end going into the modem’s port where it fits perfectly.
  2. With this, your modem is ready to deliver the internet, but in case, you are using voice and TV service as well, then you will have to use a splitter. Therefore, the one end of the coaxial cable that you have connected to the cable outlet remains intact, but the other end is now connected to the splitter. Take other two coaxial cables and connect one of their ends to the output ports of the splitter. The other ends of the cable will go into the input ports of the Spectrum modem and receiver respectively.
  3. So far so good, now you will have to plug the modem into the power outlet using a power cord. With one end being connected to the AC mains, the other end needs to be connected to the modem. As you make this connection, turn on the power supply followed by waiting for a couple of minutes because that’s how much the modem is going to take to power up.
  4. It’s time to use the Ethernet cable, so connect one end of the cable to the Spectrum modem with another end going into the Ethernet port of your Wi-Fi router or PC.
  5. With that, the setup concludes and now, you need to launch a web browser and enter ‘’ in the address bar. You can do this step on your PC or smartphone. As the webpage opens, click on ‘Get Started’ and enter all the necessary details asked on the page. At last, click the ‘Activate’ button to conclude the activation process.

In case, you find any issues setting up and configuring your Spectrum router, then you can consult experts for the same.