How To Log In To An Arris Router?

A significant number of people are using Arris routers and if you too are among those people, then you will be interested in the process Arris router login. This guide will show you the exact procedure as to how you can login to your Arris router or modem using Arris router IP and default password.

If you have Arris login details at your disposal, then you will be in a better position to set up and configure your router, secure your Wi-Fi network and enable and disable guest Wi-Fi networks, etc.

What’s the default login details of the Arris router?

Here is the default username and password for the Arris router:

  • Username: admin
  • Password: password

Now you should login to your Arris router:

Connect to your Arris Network

You need to connect your wired or wireless network with the help of your computer or phone.

Launch a web browser on your computer and go to the router’s IP

You need to enter ‘’ in the address bar. In case, this IP doesn’t work, then you need to try these IP addresses.


Enter the default Arris router’s password.

Here are the details that you need to use to perform Arris router login:

  • Username: admin
  • Password: password

In case, this doesn’t work, then you or someone else have changed the details, so you’ll have to factory reset your router to change the details to defaults.

Can’t login to Arris Router?

In case, you are unable to connect to the Arris router, then you should reset your router.

Here are the steps that you need to follow to reset the Arris router:

  1. On the backside of your router, look for the ‘Reset’ button.
  2. Press the ‘Reset’ button using a sharp object for 12 seconds or until you see all the LEDs on the router glowing at once.
  3. The router will boot, so wait until that happens. Once it boots successfully, it means the router is restored to factory default settings.

How to access the Arris router settings page?

To access the settings page of the Arris router, follow these steps:

  1. Connect your PC to the Arris router using an Ethernet cable. Plug one end of the cable into the Ethernet port of the PC with another end going into the router’s Ethernet port.
  2. Launch a web browser on your PC and enter ‘’ in the address bar. Hit ‘Enter’ and let the page load up.
  3. Locate ‘Login’ button on the webpage. Click on it and enter the default username and password as mentioned above to perform Arris modem login.
  4. As you enter the dashboard of your router, you will have to configure the wireless settings. Tap on the ‘Wireless Setup’ link located on the left side of the page.
  5. Next, you need to click on the ‘Channel and SSID’ link followed by entering your router’s wireless network name. Click on the ‘Security’ link to set a passphrase for your network.
  6. If you wish to set a custom password, then tap on the ‘Utilities’ link on the left side of the page followed by clicking ‘System Settings’ that you can find in the ‘Administration Password’ section.
  7. After that, click ‘Save’ to save the new password.

If you are still not able to perform a successful Arris router login, then you should take the help of Arris router experts.

Leave a Comment